home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus 1995 #5 & #6
/
Amiga Plus CD - 1995 - No. 5 and 6.iso
/
pd
/
grafik
/
lightwave
/
lightwave-jan95
/
000319_owner-lightwave-l _Thu Jan 26 19:20:41 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-02-04
|
2KB
Return-Path: <owner-lightwave-l>
Received: by netcom6.netcom.com (8.6.9/Netcom)
id PAA17721; Thu, 26 Jan 1995 15:53:23 -0800
Received: from clark.net by netcom6.netcom.com (8.6.9/Netcom)
id PAA17611; Thu, 26 Jan 1995 15:52:41 -0800
Received: (jamesb@localhost) by clark.net (8.6.9/8.6.5) id SAA21541; Thu, 26 Jan 1995 18:53:30 -0500
Date: Thu, 26 Jan 1995 18:53:29 -0500 (EST)
From: James Brooks <jamesb@clark.net>
To: lightwave-l@netcom.com
Subject: Clear Surface List in Modeler?
In-Reply-To: <Pine.SOL.3.91.941113100830.18369A-100000@explorer>
Message-ID: <Pine.SOL.3.91.950126184829.16374B-100000@explorer>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-lightwave-l@netcom.com
Precedence: bulk
I am going to try this one more time...
Is there a way to clear the surface list in Modeler?
Meaning, I created an object in Modeler and give it a surface name and
after doing what I have to do with the object I get rid of it by
hitting the 'z' key (delete) BUT the surface name(s) are still in the
list (polygon statistics)!
Other then hitting new buttone again and setting up the parameters that
way I like it, (ei. points off, snap NONE, grid unit setting, etc.)
Is there a way to clear the surface list?
---------------------------------------------------------------
James "Alex" Brooks Amiga 4000/040/28MHz 20MB RAM
Lightwave 3.5 / Imagine 3.0 VideoToaster 4000 3.1
Sysquest 3.5" 270MB Bernoulli 90Pro
NEC 3xp Triple Speed CDROM Warp Engine 4028
Interchange 3.0 Dynamic Motion Module 1.06
Epson ES-600C Scanner E-Mail: jamesb@clark.net
---------------------------------------------------------------